6 SIGNS THAT TELL YOU YOUR RADIATOR IS CLOGGED

Are you aware of what to do if your radiator begins to make odd noises? Or, worse yet, if it stops working altogether? If not, don’t worry! We’re here to help. In this Article, will discuss six signs that tell you your radiator is clogged. Knowing these signs allows you to take action before the problem gets too severe.

SIGN 01: OVERHEATING ENGINE

An overheated engine is one of the most prominent signs that your radiator is clogged. If you notice that your car’s temperature gauge is reading higher than usual, it’s time to take your vehicle in for service. Signs of an overheating engine include:

  • The temperature gauge needle moving into the red zone
  • steam coming from under the hood
  • smoke coming from under the hood

If you notice these signs, pull over immediately and turn off your engine. Do not open the hood until the engine has cooled down completely.

SIGN 02: COOLANT LEAK

It is a sure indicator that your radiator has a blockage when fluids, particularly radiator coolant, begin leaking. When the fluid in your radiator cannot flow properly, it flows in another location, which causes leaks. As a result, always consider a potential radiator blockage when there is a coolant leak.

SIGN 03: LOW COOLANT LEVEL

It’s a good idea to inspect your radiator for leaks if you find that your coolant level is low. The coolant may run out of a blocked radiator, resulting in a low coolant level. It’s crucial to check your radiator and top off the coolant as necessary since low coolant levels might result in the engine overheating.

SIGN 04: DISCOLORED AND THICKER COOLANT

You are aware of the original color of your coolant, right? Do you take care to check your coolant’s condition? If you do, you’ll be able to see that its color and viscosity have changed. The coolant will develop a dirty brown shade and feel heavier than usual when rust, sludge, and other impurities mix. Whenever this occurs to your coolant, the likelihood of accumulation rises, and the radiator’s efficiency will decrease.

SIGN 05: DAMAGED WATER PUMP

If your radiator is clogged, it can cause damage to the water pump. The water pump is responsible for circulating the coolant throughout the engine. If the coolant can’t flow properly, it can cause the water pump to overheat and fail. This will eventually lead to your engine overheating as well.

 SIGN 06: BLOCKED, BENT, OR DAMAGED RADIATOR FINS

The radiator fins are the metal pieces that protrude from the radiator. They help dissipate heat and keep the coolant cool. If they become blocked, bent, or damaged, it can prevent the coolant from flowing properly and cause your engine to overheat.

CONCLUSION:

If you notice these radiator signs, taking action is essential. A clogged radiator can cause severe damage to your engine if left unchecked. Try flushing the radiator with a solution of 50% water and 50% vinegar. You might have to replace the radiator if this doesn’t work.

 

Top 7 Common Causes of Brake Failure

Brake failure in an automobile can be serious, and each year leads to hundreds of car accidents. Some of these accidents result in serious injury or death and in all likelihood could have been avoided if the driver had noticed the signs of brake failure. Let’s consider the seven most common causes of brake failure in cars today.

1. Owner Neglect
The most common cause of brake failure is owner neglect. Brakes, like many other parts of an automobile, have a limited lifespan and should be occasionally inspected for wear. Although many brands of brake pads and shoes boast a long life, this estimate is based on standard driving patterns. If you find yourself constantly stopping and going in cities or neighborhoods, the life of the brake pads and shoes will be greatly reduced.

2. Overheating Brake Pads
Brake pads can overheat due to excessive use and become hard or brittle. This hardening decreases the ability of the pads to properly grip the wheel rotor disk, increasing the distance necessary to stop the car.

3. Damaged Rotor Disks
Damaged or “scored” rotor disks on the wheel can decrease the life of your brake pads, making stopping more difficult. Have your rotor disks smoothed or “turned” by a trained mechanic when your brake pads are replaced.

4. Leaking Hydraulic Fluid
Oil or other hydraulic fluid can leak from your car’s engine or brake lines. If you find stopping has become difficult, have your brakes inspected to rule out any contamination from a leaking hydraulic line.

5. Driving Through Mud or Water
Driving through mud or water will naturally “lubricate” your brake pads and rotor disks. Gently tapping the brakes can help remove excess water and re-establish the proper friction between your car’s brake pads and rotor disks. As always, use caution when driving in wet conditions, especially when your car’s wheels are partially submerged in water.

6. Loss of Hydraulic Brake Fluid Pressure
Loss of hydraulic brake fluid pressure will decrease your ability to stop quickly. If you find your brakes do not seem to work at all or are working only modestly, tap the brakes several times to help force fluid throughout the brake system. Though effective in helping stop your car, this technique should not be used unless absolutely necessary. Have a certified brake specialist check your brake system for any leaks and refill the reservoir with brake fluid.

7. Overloading Your Automobile
Overloading any automobile will change its ability to stop and can potentially damage the braking system. Only load your car as suggested by the owner’s manual.

5 Reasons Why Your Steering Wheel is Shaking

Many drivers are frightened when they notice a shake or vibration in their vehicle, but it’s important to avoid jumping to conclusions. Why is your steering wheel shaking, really? There are several potential issues at play; however, the most common cause is unbalanced tires. When your car’s tires are unbalanced, the steering wheel will often vibrate—the entire vehicle might feel like it’s shaking. Read on to learn more about the causes of a shaking steering wheel and how we can help!

f your steering wheel shakes, it can most likely be chalked up to one of the five following problems:

 

  1. Unbalanced Tires: When your car’s tires are unbalanced, weight distribution is also unbalanced. This causes the vehicle to vibrate, especially at highway speeds. In this case, steering wheel shaking is even more noticeable if the car has a lightweight suspension system. Failing to address this issue can result in damage to your car’s suspension components.
  2. Misaligned Wheels: Your car’s wheels also need to be properly positioned. If you’re usually careful when crossing railroad tracks and take care to avoid potholes, you can more easily avoid throwing your wheels out of alignment. One tell-tale sign that your wheels are misaligned is uneven tread wear.
  3. Bad Wheel Bearings: When the wheel bearings become damaged or aren’t properly lubricated, the resulting friction can cause steering wheel shaking. If this is indeed the problem, the wheel won’t shake all the time — just during turns. Sometimes, simply cleaning the bearings can stop the shaking, but if there’s damage, you’ll need to bring your vehicle in for service.
  4. Suspension Problems: Damaged or loose suspension components or an imbalanced driveshaft can be the causes of steering wheel shaking. Whatever the case, you shouldn’t postpone these repairs. They’re fairly simple fixes, and our team can have you back on Rye roads in no time.
  5. Brake Problems: Does your steering wheel shake when you slow your speed? If so, the problem may be the brake system. Warped brake rotors or damaged brake calipers, pads, discs, or shocks can be the cause.

5 Ways to Extend the Life of Your Brakes

Despite that long lifespan, though, your brakes will eventually require maintenance. With that in mind, you may be wondering what you can do to extend the life of your brakes and avoid emergency repairs or maintenance.

In this blog, we’ll discuss the best ways to make your brakes last longer and keep your car safe.

Let’s dive in.

5 Ways to Extend the Life of Your Brakes

Want to make your brakes last as long as possible? Here are five maintenance tips:

1. Take it slow

When you drive fast, you cause lots of wear and tear on your brakes. Stopping a car traveling at 50 or 60 miles an hour generates a great deal of friction and heat on brake pads, which can cause them to break down rapidly.

Over time, this repeated heat can also cause the rotors to warp, leading to extensive (and expensive) damage to your braking system. Instead of driving like a lead foot, keep your speed low in heavy traffic and do your best to avoid sudden braking.

2. Use engine braking in hilly areas

Are you driving downhill? Hauling a heavy load? Use engine braking instead of your vehicle’s brakes.

In manual transmission automobiles or cars with a mode that allows you to manually shift gears, you can use engine braking (which uses the car’s transmission to down-shift and show the vehicle) to preserve your brake pads and rotors.

While engine braking is a great way to reduce brake burnout on steep hills or when hauling something heavy, it will not stop your vehicle fully, so you’ll need to supplement it with your brakes.

3. Invest in routine brake maintenance

Every time you take your car in for routine maintenance, have the auto repair shop inspect your brakes.

A good mechanic will examine your brake pads and rotors, flush and replace your brake fluid, and remove any debris that may be lodged in your brakes and causing damage.

These routine inspections are also necessary because they allow you to replace brake pads before they wear out completely. This, in turn, will save you money on brake repairs.

4. Reduce your vehicle’s weight

Whenever possible, remove additional weight from your vehicle. Sandbags, excess junk, and anything else that’s weighing down your car is also causing excessive brake wear. In addition to helping extend the life of your brakes, removing excess weight from your vehicle will also improve your gas mileage.

5. Practice defensive driving

Defensive driving involves surveying the surrounding area and anticipating potential driving hazards (like potholes) before you encounter them. It allows you to preserve your brakes by avoiding sudden stops, tailgating, and other activities that are tough on your car.

 

 

Easy Steps to Clean Car Battery Corrosion

Many drivers will encounter situations where the car is difficult to start, car can not jump-start because of a problem of important parts, one of the most important reasons is because the positive and negative extreme mouth of the car battery is corrosion. Car battery positive and negative electrode corrosion will reduce the efficiency of the use of car batteries, car maintenance for battery maintenance can not be ignored, and learning to clean the corrosion of the car battery terminal can avoid unnecessary spending and trouble.

How to Clean Car Battery Corrosion? Follow these 6 easy steps to remove car battery corrosion:

1. Disconnect Your Battery Cables

Disconnect the battery with the negative terminal first. Use a wrench to disconnect the negative terminal and avoid letting the wrench come into contact with the positive side as it may shock you. Do the same for the positive terminal.

You can identify negative and positive cables by checking what they’re marked by: the negative sign (-), the abbreviation ‘NEG’, and/or the color black; and the positive sign (+), the abbreviation ‘POS’, and the color red.

2. Check for damage to the battery.

If you notice any cracks, dents, or warping with your battery, cleaning the corrosion may not do you any good. then that should serve as an indication that you should have them replaced straight away.

3. Cleaning Your Battery With Baking Soda & Vinegar

If you find yourself dealing with extra stubborn corrosion that doesn’t come off with just baking soda, try the baking soda and vinegar method to clean your battery terminals. Vinegar is a powerful acid that can break down corrosion pretty quickly when combined with the fizzing action of baking soda. The baking soda method, for its part, is tried and true as well as simple to perform.

To use this method, first, make sure your terminals are disconnected. Then simply sprinkle baking soda powder on your terminals liberally. Next, pour the vinegar on the terminals and baking soda and let it sit. When you pour the vinegar on the terminals you’ll see it fizz. Similar to peroxide the fizzing action breaks up and moves the dirt and grime out. After it sits for a few minutes and it’s done fizzing, rinse it clean with hot water and follow the remaining steps from below before reconnecting your cables.

4. Rinse and Dry

Completely dry the battery. Water and electricity don’t mix well, so make sure the battery and its terminals are completely dry before reassembling it. After that, you’ll want to use your toothbrush or bristled brush to scrub the corrosion off. Once you’ve scrubbed away all the corrosion, rinse the battery and cable ends completely with clean water and let it all dry.

Be careful not to let the solution nor the corrosive elements fall on the other engine components to keep your car protected from the damage these could potentially cause. We advise you to take the battery out completely.

5. Take Some Corrosion-Preventative Steps

It’s never a bad idea to spray an anti-corrosion solution or apply an anti-corrosion gel to your terminals after you’re through. Doing so can help to prevent the issue from recurring! Also known as battery terminal protectors, these little guys help protect your battery posts. Use pads coated in a battery-corrosion preventative compound.

6. Reconnect Your Battery to Your Vehicle

Once you clear the corrosion (step 3), let everything dry completely (step 4), and apply some preventative substances to your battery parts (step 5), you’re ready to reconnect your battery to your vehicle.

Do this in REVERSE order to avoid injury. Start with connecting the positive battery terminal first, followed by the negative one. Car battery corrosion removal is a must-know maintenance task. Keeping your battery clean will add years to its lifespan and help maintain its performance levels.

How to Drive Safely on Ice

Driving on ice requires extra caution! Here are some tips to stay safe behind the wheel:

  1. Slow Down: Reduce your speed significantly when driving on icy roads. It takes longer to stop or maneuver on ice.
  2. Increase Following Distance: Keep a safe distance from the vehicle in front of you. Sudden stops are riskier on icy roads.
  3. Gentle Movements: Avoid sudden acceleration, braking, or sharp turns. Make slow and deliberate movements.
  4. Winter Tires: Consider using winter tires for better traction on icy surfaces.
  5. Stay Informed: Check weather and road conditions before your trip. Plan accordingly and allow extra time for your journey.
  6. Brake Carefully: If you need to brake, do it gently. Use your brakes with steady, light pressure to avoid skidding.
  7. Stay Alert: Keep your focus on the road. Watch for icy patches, especially in shaded areas or bridges.

Remember, your safety and the safety of others are top priorities when driving in icy conditions. #DriveSafe #WinterDrivingTips 

Items to Include in an Emergency Car Kit

Some of a driver’s worst fears are a dead battery or alternator, a blown gasket, your car running out of gas and any number of other car troubles that leave you stranded on an empty stretch of road.

For winter drivers, there’s also the possibility of sliding off an icy road into a snowbank. A quick call to a tow truck or roadside assistance service will usually get you to safety within a couple of hours, but technology can fail, and there are still parts of the country that aren’t covered by cellular service.

In such scenarios, having a car safety kit with the right components can make the difference in keeping you and your passengers safe until help arrives. 58% of people have some emergency supplies in their cars, but only 30% are confident that what they have is sufficient if bad weather strikes.

Depending on the problem, having the proper tools can also get you back on the road as quickly as possible. While some items should be found in every trunk, not every roadside emergency kit is built the same. You should tailor your kit to the type and condition of your vehicle, as well as the weather in which you’re typically driving. With the unpredictability of winter weather, even drivers in traditional warm-weather states may want to consider adding safety items for snow and ice. It’s always wise to err on the side of caution and include certain items just in case.

Here is the essential emergency car kit list:

1. Flares and lighting

The first and most important safety items to include in your auto emergency kit are flares or reflective triangles, which warn other drivers of the roadside hazard, especially in low visibility conditions. In case of a breakdown, they should be spaced out evenly along the roadside behind your vehicle. For a reusable, longer-lasting option, invest in battery-operated LED flares. A flashlight is also a necessity, especially a multi-use version that flashes.

2. Jumper cables

Jumper cables are another essential to include in the car emergency kit. Batteries can die or lose their juice at the least opportune moment, and jumper cables, with a jump start from another vehicle, can at least get you to the next service station. You should also consider carrying a separate battery pack for starting your car when no one else is around to help.

3. First aid kit

A first aid kit is a must-have item to include in any emergency road kit, indispensable for addressing smaller everyday injuries and more serious wounds from an accident. You can purchase them prepacked with all the essentials or assemble one customized to your needs. Families with small children should include medications that are age appropriate. Be sure to know what medications are needed for your passengers and pack enough to last for a reasonable time.

4. Spare tire, tire iron and car jack

A spare tire and tire-changing equipment should be included in your car emergency kit. You should familiarize yourself with how to change a tire just in case help is unavailable and you have to do it yourself. Check your kit every 6 months and make sure that your spare tire is properly inflated.

5. Mobile phone and charger

Another essential for your safety when driving is a working mobile phone and charger in case of a low or dead phone battery. It’s important that you can call for help if you’ve been seriously injured from a car accident or something is wrong with the car.

6. Water

Along with keeping warm, staying hydrated is an essential element of survival. Keep clean drinking water in smaller plastic containers, which will thaw faster with a little body heat in the winter than large gallon jugs. If driving in a remote area, you should be sure to bring plenty of water – one website recommends at least one gallon per person per day for three days if possible.

7. Nonperishable food

Packing food in your kit will help keep you fed in an emergency. Nonperishable food such as granola bars, soup, nuts, jerky, peanut butter and dried fruit are great options to pack in your kit.

8. Car fluids and tools

Flat tires are one of the most common causes of roadside trouble, but it’s not always possible to change a tire. Including a can of tire inflator and sealant in your kit can get you back on the road at least until the next stop. Other items that may help avert a roadside crisis and keep you going:

  • 1 quart or more of motor oil (make sure it’s the right formula for your car)
  • 1 gallon of coolant
  • A toolkit with screwdrivers, pliers and an adjustable wrench
  • 1 set of windshield wiper blades

Good wiper blades are also crucial to have handy, as they can clear a windshield in less than three swipes without leaving streaks. Keep a set of new blades in your vehicle so you can replace worn blades quickly and on the go.

9. Winter emergency car kit

Aside from winterizing your car, you should keep certain things in your car to prepare you for a winter emergency. If you know you’ll be driving in snowy weather, include:

  • An ice scraper
  • A spray bottle with washer fluid
  • 1 set of snow chains for your tires
  • A shovel
  • Waterproof matches

Store all your items together in a box or carrying case in the trunk, making sure it’s easily accessible in case you need it in a hurry. Blankets, a sleeping bag or a heat-retaining emergency survival blanket are critical for making it through a cold night, especially in wintry climates. Bottled water and long-lasting food items such as granola or energy bars can be rotated out over time.

6 Signs that Your Vehicle’s Exhaust System Needs Attention

Internal combustion engines produce exhaust gases that can be dangerous if breathed in for too long. The primary purpose of the exhaust system is to keep these gases far away from you–though it also serves other purposes, including reducing engine noise and decreasing pollution. So, it’s important to keep an eye (and ear, and nose) out for signs that the exhaust system isn’t performing as it should be. Below are six possible symptoms.

6. Vibration/Shuddering

There are many things that can cause your car to vibrate, and most of them aren’t good. While vibration is often caused by non-exhaust-related problems, trouble with the exhaust system is still a possible cause. One of the hangers or brackets that hold the exhaust pipes against the underside of your vehicle may have come loose, or the pipes may have become misaligned. A failed muffler or clogged catalytic converter could also cause vibration. Another common cause is an exhaust leak. As exhaust gases escape through a small hole, they may cause the car to shudder.

5. Loud Engine Sound

The muffler that’s located near the end of the exhaust system serves to muffle the sound of the engine. If it’s damaged or not working the way it should, the engine will sound much noisier. However, leaks located before the muffler in the exhaust system can also lead to a loud engine sound, so pinpointing the exact location of your exhaust leak can be difficult without professional help.

4. Drop in Power & Fuel Efficiency

If you find you’re filling your gas tank more often than you used to, it may be due to trouble with the exhaust system. This is because the engine is working harder and using more fuel to try to compensate for the problem. In addition, you may find that getting up to speed is tougher, since exhaust leaks and other exhaust problems can keep your Subaru from performing at its peak.

3. Scraping or Rattling Sound

If it sounds like something is dragging beneath your car, scraping or rattling against the road, it’s time to pull over immediately. This is likely to be an exhaust pipe that has come loose. It’s dangerous to drive with a dragging pipe, and it can create a danger to cars behind you due to flying sparks. That danger to yourself and others only grows if the pipe snaps off completely.

2. Exhaust Smell

The smell of exhaust in your vehicle is never a good sign, and it may be due to an exhaust leak. If you notice that the exhaust has the scent of rotten eggs, it may be due to a failed catalytic converter. Exhaust gases contain a small amount of sulfur, which the catalytic converter then converts to odorless sulfur dioxide. If it’s not doing its job, the sulfur will still give off its characteristic rotten-egg smell.

1. Illuminated Check Engine Light

The oxygen sensors and the catalytic converter are important components of your vehicle’s exhaust system. The oxygen sensors read the level of oxygen in the exhaust to make sure that your car is getting the right fuel/air ratio, and the catalytic converter transforms some of the more harmful pollutants generated by combustion into less harmful compounds. Trouble with either of these components may send the signal to illuminate the check engine light.

4 Basic Maintenance Tips for Your Pickup Truck

Pickup trucks offer reliability, safety, and longevity for many drivers. A quality truck can haul thousands of pounds in towing power and provide a safe means of transportation for you and your family.

Over time, if you ignore its maintenance needs, a pickup truck can run into permanent problems. Adhere to these four basic maintenance tips for your pickup truck so that your vehicle runs smoothly. Before you know it, your car can outlast its life expectancy and provide years of dependability.

Check Your Vehicle Fluids

For a pickup truck to run correctly, it needs the necessary fluids. First and foremost, engine oil needs to remain clean and free of dirt, dust, and debris. Additionally, other fluids such as engine coolant, windshield washer fluid, and other liquids must stay specific to your make and model.

Checking your owner’s manual will provide the correct fluids you need so you don’t accidentally pick up the wrong one. For engine oil, pickup trucks older than 2007 need oil changes every 5,000 miles, while newer vehicles require replacement every 7,500 miles. It’s one of the basic maintenance tips for your pickup truck you need to know.

Rotate Your Tires Routinely

Over time, tires start to wear down and lose their tread on the road. The less tread your tires have, the worse the grip is on the road. Uneven or worn tread can quickly result in hydroplaning during a rainstorm or sliding along icy roads.

Getting your tires professionally rotated will help prevent this issue. It helps maintain an even amount of treadwear on your truck’s tires. Additionally, it helps prolong the life of your tires and vehicle suspension while improving gas mileage.

Keep the Exterior Clean

Whether you live in consistent 75-degree and sunny weather all year-round or somewhere where you experience all four seasons, your pickup truck endures a lot. Rainstorms, road salt, hail, and other loose debris can kick up into your vehicle’s paint and create a layer of grime.

Maintaining a consistent cleaning schedule will keep your vehicle’s exterior looking beautiful and shiny. Regularly cleaning your car will also keep your car’s paint from fading and even reduce rust growth. Lastly, don’t forget to clean your undercarriage.

Keep an Eye on Wheel Alignment

When you get your oil, it’s also essential to check your wheel alignment. Wheel misalignment can occur by driving through roads at high speeds and aggressive driving. It can easily throw your wheel alignment off and subsequently increase wear on your tires, worsen gas mileage, and affect hauling abilities. Make sure you maintain your wheel alignment through evenly inflated tires. Loading evenly into your truck bed to prevent vehicle pulling can also maintain the alignment.

Having a pickup truck brings plenty of benefits to your daily routine. Maintaining and caring for your truck is a regular investment of your time and energy, but it’s worthwhile.

10 Tips To Help Keep The Interior Of Your Car Clean

Keeping your Car’s interior clean is important for keeping its appearance, hygiene, and overall well-being. Here are some tips to help you keep the interior of your car looking spotless:

1) Your Car isn’t a Trash Can

Make it a habit to remove trash from your car daily. Try to avoid throwing trash and saying you’ll clean it up later because this will become a bad habit. To help with this, use a small trash bag or container to dispose of the garbage to make it easier to clean up.

2) Vacuum Regularly

Crumbs and dirt can be a tough thing to get out of your car. That dust can also seep into your seat covers and cracks in the car. It’s important to regularly vacuum the Car’s interior to keep it clean. Pay attention to the carpets, seats/seat covers, floor mats, and difficult to reach places.

3) Wipe Surfaces Frequently

While vacuuming is a helpful tool, wipes can be even more helpful when it comes to smaller areas or areas that need more detailed cleaning. This includes the dashboard, steering wheel, and door handles. You can use a damp cloth or a cleaning solution to wipe these spots down.

4) Not All Seat Covers Are Ugly

Seat covers can help protect your car’s seats from spills and stains. Not every seat cover is ugly, you can find pretty, affordable ones right on amazon. This is a great way to maintain your vehicle from wear and tear. Make sure to clean these covers regularly as well or else you’re just creating more of a dirty mess.

5) Clean Upholstery and Carpets

Whenever you find stains on the upholstery or carpets, treat them with a suitable cleaner or stain remover as soon as possible. Follow the instructions on the product and use a clean brush or tool to scrub the dirty area.

6) Pay Attention to Glass and Mirrors

Clean the interior glass and mirrors regularly to guarantee good visibility. Use a glass cleaner and a lint-free cloth to remove smudges and fingerprints. Also keep the glass above your console and radio clean to help with visibility.

7) Organize Storage Compartments

Use organizers or storage bins to keep your belongings neatly in order. Find a good spot in the trunk or even the back seat where these bins can be stored. This will prevent messes and make it easier to keep your car clean.

8) Avoid Eating in the Car

Don’t eat or drink in your car, although this is a hard challenge for everyone, it will help in the long run. Eating in the car can lead to spills and crumbs, which can be challenging to clean.

9) Be Cautious With Liquids

When transporting liquids in your car, make sure they are secure and sealed to avoid spills. If a spill does occur, immediately clean it up to prevent stains or odors.

10) Regularly Maintain the Air Conditioning System

Clean or replace the cabin air filter as much as your Car’s manufacturer recommends. This will keep your car’s air fresh and reduce dust messes.

Remember that prevention and consistency is key to maintaining a clean car interior. By establishing good habits and planning out in advance, you can keep your car looking and smelling fresh for a very long time.