8 Items to Include in an Emergency Car Kit

Some of a driver’s worst fears are a dead battery or alternator, a blown gasket, your car running out of gas and any number of other car troubles that leave you stranded on an empty stretch of road.

For winter drivers, there’s also the possibility of sliding off an icy road into a snowbank. A quick call to a tow truck or roadside assistance service will usually get you to safety within a couple of hours, but technology can fail, and there are still parts of the country that aren’t covered by cellular service.

In such scenarios, having a car safety kit with the right components can make the difference in keeping you and your passengers safe until help arrives. 58% of people have some emergency supplies in their cars, but only 30% are confident that what they have is sufficient if bad weather strikes.

Depending on the problem, having the proper tools can also get you back on the road as quickly as possible. While some items should be found in every trunk, not every roadside emergency kit is built the same. You should tailor your kit to the type and condition of your vehicle, as well as the weather in which you’re typically driving. With the unpredictability of winter weather, even drivers in traditional warm-weather states may want to consider adding safety items for snow and ice. It’s always wise to err on the side of caution and include certain items just in case.

Here is the essential emergency car kit list:

1. Flares and lighting

The first and most important safety items to include in your auto emergency kit are flares or reflective triangles, which warn other drivers of the roadside hazard, especially in low visibility conditions. In case of a breakdown, they should be spaced out evenly along the roadside behind your vehicle. For a reusable, longer-lasting option, invest in battery-operated LED flares. A flashlight is also a necessity, especially a multi-use version that flashes.

2. Jumper cables

Jumper cables are another essential to include in the car emergency kit. Batteries can die or lose their juice at the least opportune moment, and jumper cables, with a jump start from another vehicle, can at least get you to the next service station. You should also consider carrying a separate battery pack for starting your car when no one else is around to help.

3. First aid kit

A first aid kit is a must-have item to include in any emergency road kit, indispensable for addressing smaller everyday injuries and more serious wounds from an accident. You can purchase them prepacked with all the essentials or assemble one customized to your needs. Families with small children should include medications that are age appropriate. Be sure to know what medications are needed for your passengers and pack enough to last for a reasonable time.

4. Spare tire, tire iron and car jack

A spare tire and tire-changing equipment should be included in your car emergency kit. You should familiarize yourself with how to change a tire just in case help is unavailable and you have to do it yourself. Check your kit every 6 months and make sure that your spare tire is properly inflated.

5. Mobile phone and charger

Another essential for your safety when driving is a working mobile phone and charger in case of a low or dead phone battery. It’s important that you can call for help if you’ve been seriously injured from a car accident or something is wrong with the car.

6. Water

Along with keeping warm, staying hydrated is an essential element of survival. Keep clean drinking water in smaller plastic containers, which will thaw faster with a little body heat in the winter than large gallon jugs. If driving in a remote area, you should be sure to bring plenty of water – one website recommends at least one gallon per person per day for three days if possible.

7. Nonperishable food

Packing food in your kit will help keep you fed in an emergency. Nonperishable food such as granola bars, soup, nuts, jerky, peanut butter and dried fruit are great options to pack in your kit.

8. Car fluids and tools

Flat tires are one of the most common causes of roadside trouble, but it’s not always possible to change a tire. Including a can of tire inflator and sealant in your kit can get you back on the road at least until the next stop. Other items that may help avert a roadside crisis and keep you going:

  • 1 quart or more of motor oil (make sure it’s the right formula for your car)
  • 1 gallon of coolant
  • A toolkit with screwdrivers, pliers and an adjustable wrench
  • 1 set of windshield wiper blades

Good wiper blades are also crucial to have handy, as they can clear a windshield in less than three swipes without leaving streaks. Keep a set of new blades in your vehicle so you can replace worn blades quickly and on the go.

TIPS

10 Reasons Why Your Car Won’t Start

It’s one of the worst things that can happen to a driver. You turn the key in your car’s ignition, perhaps hear a few alarming noises, and then…nothing. Whether in the parking lot after dinner, in your driveway before work, or even at the rest stop after you’ve stopped for snacks, there’s never really a good time for your car to not start. It’s usually indicative that your car needs some kind of repairs, and even when it doesn’t, it creates a serious logistical challenge on your hands.

What do you do when your car won’t start? After calling roadside assistance and getting you and your car to a safe location (preferably an auto shop), you’ve got to figure out why it’s not starting. Here are ten possible reasons why your car won’t start.

1. Bad or dead battery
The most common reason cars don’t start is a dead or faulty battery.1 Even though most cars run on gasoline, they all require electrical power to function. The starter that cranks your engine to start requires an electrical signal to fire.2 If something’s wrong with your battery, your car engine won’t turn over. There are other symptoms that may indicate a dead battery, but checking if your engine turns over at all is always a good first step.

The good thing about dead batteries is that you don’t need a professional to get your car going again. Jumping a car battery is something that anyone with a base level of know-how can accomplish. Battery jumps are temporary solutions though, and new batteries can be expensive, so it’s best to just take good care of your battery. For more on how to do that, check out these tips for avoiding a dead battery.

2. Bad alternator
A bad alternator goes hand-in-hand with a bad battery. The alternator recharges the battery and keeps the car’s electrical systems running after the car has started. If you’ve got a bad alternator, you don’t necessarily have a bad battery, but you certainly might not have a functioning one. Any bad alternator should be replaced, so be sure to look out for any signs of a bad alternator.

3. Starter motor
Dead batteries or alternators aren’t the only things that can stop your ignition from functioning. If something is wrong with the aforementioned starter motor that receives the electrical signal to crank the engine, your car may not respond to the turn of your key.

Common symptoms
One of the easiest ways to tell if your starter motor has a problem is to check if your lights come on when you turn your key in the ignition. Turning your key turns your battery on, so if you’ve turned your key all the way and the lights come on, but the engine doesn’t turn over, your starter motor could be the culprit. Any signs of electrical failure could also indicate the starter motor needs help. Repeatedly trying to use a starter motor that has been subject to a blown fuse could cause it to overheat and emit smoke.3

4. Bad ignition switch
The ignition switch is another step on the road that leads from turning your key to starting your engine. It plays a crucial role between your battery and starter motor, carrying power from the battery to the engine.

Common symptoms of a bad ignition switch
If you have a bad ignition switch, you won’t hear the starter motor working to start the engine. You also might experience some electrical issues since the ignition switch effectively activates your car’s main electrical systems. Flickering or dying dashboard lights are a prime example. You may also have difficulty turning your key in the first place.4

5. Spark plugs
If your car doesn’t start, it’s possible that its spark plugs are old or dirty. Spark plugs that have become defective in any way can lead to reduced gas mileage, lack of acceleration, engine troubles like misfires, and yes, even difficulty starting your car at all.5

6. Broken distributor cap
It’s not necessarily the spark plugs’ fault. The distributor cap routes power from the engine’s ignition coil to the spark plugs. Broken or malfunctioning distributor caps can cause your engine to misfire, activate the check engine light, cause strange noises, and, of course, prevent your car from starting.6 Make sure there is no moisture under the cap and replace it immediately if it’s broken.

7. Bad timing belt
Your timing belt is another component that is integral to a functioning engine. The timing belt rotates the engine’s cam and crankshaft in unison, causing the cylinders to fire at the appropriate times.

Common symptoms of a bad timing belt
If something is wrong with your timing belt, you may hear ticking noises from your engine, strange disparities in your engine’s revving, or your engine may not turn over. Replacing your timing belt is a piece of maintenance that needs to be performed on a semi-regular basis, so if you notice any issues that could be tied to it, don’t hesitate to call your mechanic.7

8. Jammed steering lock
Ever gotten into your car and found that you can’t even turn your key? If you’ve experienced this, it’s likely that your steering lock is jammed. Your steering lock activates when someone tries to move the wheel while the key is not inserted in the ignition as an anti-theft measure.8 However, it can occasionally serve as an anti-driver measure by accident.

If your steering lock jams, try to wiggle it left and right and then gently turn it in whichever direction allows some movement. Once the lock is unjammed, you can turn the key in the ignition normally.

9. Clogged fuel filter
If fuel can’t reach your engine, your car is going to have a difficult time burning it. As obvious as that sounds, you might not realize that the fuel filter is preventing your car from starting.

Common symptoms of a clogged fuel filter
You may notice an array of fuel-related troubles, ranging from sputtering to poor gas mileage, and, of course, difficulty starting. Your fuel filter should be replaced every 30,000 miles, so if yours is coming up on that milestone and your car doesn’t start, it’s worth checking and replacing.9

10. Empty fuel tank
No one wants to run out of gas, but if you do, the silver lining is that there isn’t anything wrong with your car. If your tank is empty, your best bet is to procure a gas can and give your car the couple of gallons it needs to start, and get to a gas station.

Maintenance

Tips of Starting a Cold Diesel Engine

As the temperatures drop, we must start thinking about how to take care of our diesel trucks in cold weather. Here are some tips on how you can make sure your diesel engine will start and run efficiently when the weather gets cold.

1. Allow Time to Warm Up the Engine

In order to start a diesel engine and keep it running in cold weather, you must make sure you allow plenty of time for your engine to warm up. If you do not let your engine warm up before driving, you will make it work harder than necessary, which will lead to problems later on. The length of time your diesel engine will need to warm up depends on how low the temperatures are outside. As a general rule of thumb, if it is below zero degrees Fahrenheit, you should allow your engine up to seven minutes to warm up. If the temperature is between zero and fifty degrees, the warm-up period should be three to five minutes. Over fifty degrees will only require one or two minutes to warm up. This warm up time is necessary to increase the temperature of the combustion chamber. A diesel truck will not fully reach operating temperature until after you have started driving.

2. Consider Diesel Engine Heating Options

When temperatures drop, your engine may need additional help to warm up in order to start and run at the necessary operating temperature. Most diesel trucks come with built-in block heaters to keep the engine warm overnight. Because this puts the engine at a higher temperature, it will be easier to start and will require less time to warm up before driving. Block heaters are simple to use, too. All you need to do is plug the heater cord into an appropriately sized extension cord, then plug the extension cord into a three-pronged electrical socket that can handle the voltage of the heater. Another heating option is a diesel fired coolant heater, which adds supplementary heating to the engine, fluids, and other key parts. These heaters do not use electricity, so they can be used just about anywhere. Glow plugs are heating devices that can be useful when trying to start cold diesel engines by helping to ignite cold fuel.

If your engine is still having trouble starting in cold temperatures even with the use of the above heating options, your battery may be the issue. Batteries tend to lose about 35% of their power at freezing temperatures and can lose up to 60% when temperatures reach zero degrees Fahrenheit. Keeping your battery warm can be an easy remedy, and you can do this using either a hot plate-style warmer or a blanket warmer. The hot plate-style warmer sits underneath the battery and warms it from below. The blanket warmer wraps around the battery to keep it warm from all sides.

3. Deal with Frozen Fuel

In cold temperatures, diesel fuel can freeze or congeal together. In the event this happens, you must warm the fuel and change out the fuel filter before attempting to start the engine. You can use a winter fuel additive to reduce the risk of your fuel freezing when temperatures drop. If these steps are not taken, frozen fuel can block the flow to the injector pump and can result in engine damage.

4. Store Your Diesel Engine in a Warm Area

Whenever possible, it is best to keep your diesel engine in a warm area when it is not running. Try to store it in a place where it will also not be exposed to snow or ice in order to avoid possible damage. If you can keep your diesel engine out of the elements and at a warmer temperature, it will start much easier and will need less time to warm up.

5. Keep Your Fuel Tank Full

When a fuel tank is not full, condensation can form on the inside of the tank when temperatures drop. As the air becomes even colder at night, this condensation will then freeze. Frozen condensation in a fuel tank can cause the same problems as frozen or gelled-up fuel in your tank. By keeping your fuel tank full, you minimize the amount of space in which condensation can form. Winter fuel additives can also help control this problem.

TRUCKS

Top Tips to Take Care of Your Car If You Don’t Drive Often

From cutting out a commute to putting a car in storage for the season, there are plenty of reasons why you might not be driving your vehicle as often as you used to. But don’t let it sit collecting dust — follow these steps to maintain your car and keep it ready to hit the road:

Keep your car covered
If your home has a garage or a carport, consider parking your car inside to protect it from the elements and inclement weather. If your home doesn’t have a garage or carport and you have to park outside, consider buying a weatherproof and UV resistant car cover to protect your vehicle’s paint from accidental scrapes and protect its interior from UV damage.

Take your car for a spin twice a month.
On average, a car can sit unused for up to a month without the battery draining. To avoid finding a dead battery when it’s finally time to hit the road, take it for a 20- to 30-minute drive at least twice a month. This will also allow fluids and oil to circulate and keep your car’s critical systems lubricated.

Keep the gas tank full
While it may seem like a waste to buy gas for a car you aren’t driving regularly, you’ll be glad you filled your tank, as moisture can build up in an empty gas tank as the weather changes, which can lead to damage.

Follow the manufacturer’s recommended oil change schedule
If you’re planning on keeping your vehicle off the road for more than three months at a time, change the oil before putting it in long-term storage. If you’re still driving your vehicle occasionally but you aren’t driving it enough to hit the mileage interval for an oil change, check your owner’s manual to see how long you can wait before getting an oil change.

Check your tire pressure before driving
Your car’s tires can slowly lose pressure, especially if it sits for an extended period. Before driving your car again, check each tire’s air pressure and — if it’s lower than the manufacturer’s recommended air pressure level, which is measured in pounds per square inch — inflate each tire to the correct level.

Regularly check for pests
A sitting vehicle is the perfect home for pests like rodents and insects. To prevent these unwanted tenants from moving into your vehicle, regularly inspect inside your car’s trunk and cabin for unwanted visitors. While inspecting your vehicle, also be sure to check under the hood, as wasps and bees can squeeze in and start building a hive.

Keep your car insured
Cancelling your car insurance policy may seem like an easy way to save money if you’re not driving your vehicle often, but it’s illegal to drive your car at all without coverage — and if you’re involved in an accident, you’ll have to pay for expensive repairs out of pocket. Luckily, you can update your car insurance coverage to reflect the fact that you’re not driving as much as you used to, which could result in a lower premium.

CARS

Why is your check engine light on?

When your car’s internal computer identifies a problem with the engine or transmission, it turns on the check engine light. The reasons for a check engine light turning on can range from something minor like a loose gas cap to something more serious like a faulty catalytic converter. It could even be a sign of internal engine failure. Ignoring the problem can turn a potentially quick fix into a costly and time-consuming repair.

Why is your check engine light on?
Common minor and major reasons for a check engine light to turn on include:
Loose gas cap
An internal problem in the engine
An issue with or even theft of the catalytic converter
Faulty spark plug, spark plug wires, or ignition coils
Malfunctioning oxygen sensor
Damaged mass airflow sensor
A bad tank of gas

What to do when your check engine light comes on
Once you notice your check engine light has come on, pay attention to how the car is driving. Does something feel off? If so, reroute yourself to the nearest mechanic to get the car checked out. If the car seems to be running fine, you can check a few things on your own before heading to the mechanic.

There are a couple of simple solutions if your check engine light came on after getting gas. A loose gas cap is one of the most common reasons for the check engine light to go on. Check that your gas cap is screwed on securely and that it’s in good condition.

If you have a tank of bad gas in the car, your check engine light may come on. For example, if your vehicle is designed to run on premium gas (octane grade 91 to 94), the engine may struggle to run on regular gas (octane level 87). You can safely solve this problem by having a professional drain your gas tank. If you must drive until the tank is empty again, this may not cause severe damage, as long your car doesn’t show signs of overheating or poor engine performance.

Do you suspect something else caused your check engine light to turn on? The most foolproof method to check the engine light is to read the diagnostic code in the car’s internal computer. If you have experience working with cars, you can do this at home with an OBD-II scanner. Otherwise, head to your local service station where a mechanic can read the diagnostic code and determine the correct fix.

Why you shouldn’t ignore your check engine light.
The check engine light is sometimes confused with the maintenance required light, although the two are unrelated. The maintenance required light goes on when your car is due for routine service. Examples of routine services include an oil change. However, the check engine light is an indication that something unexpected has occurred.

Some later car models have check engine lights in different colors and modes to help you determine how severe the issue is. If your car has this feature and your check engine light flashes on and off intermittently or glows red, it’s a sign you should get your car to a mechanic as soon as possible. Depending on your car’s make and model, a solid yellow or orange light may indicate lower severity. However, it’s still a sign that you should make an appointment to diagnose and fix the problem.

What are the implications of ignoring your check engine light?
Ignoring the light and putting off a visit to the mechanic could result in more costly and time-consuming issues you’ll have to deal with in the future. The problem that caused your check engine light to turn on in the first place may get worse or impact other aspects of your car’s engine or transmission. Ignoring the problem could lead to more long-term damage that your car insurance may not cover.

You also won’t be able to pass your next car inspection until the check engine light is off and you have resolved the problem. Your best option is to get the issue resolved quickly. If you’re concerned about affording unexpected engine repairs on your car, consider mechanical breakdown insurance.

Uncategorized

Truck Driver Safety Tips to Minimize Risk

Keeping your drivers safe on the road isn’t just essential for their health and well-being. Their safety directly impacts other motorists on the road, as well as your bottom line. The Department of Labor (DOL) singles out trucking as one of the most dangerous occupations in the United States. In fact, transportation and logistics fleets have some of the highest numbers of injuries and fatalities on the job—and those numbers seem to only grow year over year. By improving the safety of your drivers, you not only ensure their protection, but you can also reduce costs associated with accidents, claim payouts, and rises in insurance premiums. The good news is that you can improve your truck drivers’ safety by creating a work culture that actively coaches, trains, and rewards the safest drivers. Read on for our best truck driving tips and advice on how to improve the overall safety of your fleet.

1. Encourage your truckers to practice defensive driving
Defensive driving is a form of driving that encourages truckers to consistently be on the lookout for potential hazards and changes in driving or road conditions. Drivers are encouraged to reduce the risk of accidents and injuries by anticipating potentially dangerous situations and making safe, well-informed decisions while behind the wheel. By using defensive driving techniques, drivers are less likely to be involved in accidents—so you can worry less about costly repairs, claim payouts, and insurance premiums increases.

Here are a few key defensive driving strategies and practices to encourage your drivers to use:
Watch out for blind spots: For drivers who operate tractor trailers or refers, being in such a large truck that’s so high off the ground can make it difficult to see cars behind or even next to their vehicle. A blind spot is any area around a vehicle that cannot be directly seen by a driver. According to the National Highway Traffic Safety Administration (NHTSA), over 840,000 accidents per year are directly due to blind spots. Most of these accidents occur when drivers are changing lanes. Since rear-view and side mirrors aren’t always effective when checking for blind spots, make sure you’re encouraging drivers to look over their shoulders and out the windows when changing lanes. Also, encourage them to leave plenty of room around their vehicles when merging.

Practice the three-second rule: When it comes to avoiding forward and rear collisions, a best practice is for drivers to follow the three-second rule. This rule states that truck drivers should allow three full seconds to pass between the time the car in front of them reaches a particular spot on the road and the time it takes the truck driver to reach that same point. If heavy rain or winds are present, drivers should increase the follow time to five seconds. If the roads are icy, drivers should increase the follow time to 10 seconds.

Be prepared for emergencies: When driving, especially over long distances, conditions can rapidly change. Encourage your drivers to be prepared for a variety of potential emergency situations—like bad driving conditions or breakdowns. Drivers who stock their cabs with water, snacks, a first aid kit, a change of clothes, and blankets can comfortably and safely weather unexpected conditions that may require them to pull off the road or wait long periods for vehicle repairs.

Stay calm, cool, and collected: Road rage is a serious threat to safe driving. When truckers are cut off, honked at, or otherwise harrassed by other drivers, it can be tempting to indulge in road rage behaviors, like tailgating or weaving between lanes. Drivers who allow their anger to control their driving put themselves and others at risk for accidents. Encourage your drivers to de-escalate road rage situations by increasing the distance between themselves and angry drivers.

Always signal: For drivers who operate on longer stretches of roads or during non-peak traffic times, it can be tempting to complete lane changes and exit highways without signaling. But failing to signal can increase the likelihood of collisions. Remind drivers that signaling before changing lanes or turning is required by law, and they should still signal even if they don’t see any other vehicles nearby.

When in doubt, slow down: Train your drivers to always default to slowing down in response to changes on the road, including bad weather or poor visibility. Slowing down offers drivers extra time to take corrective action or respond to sudden changes, like an animal running onto the highway or slippery roads when it starts to rain. Slowing down can prevent accidents altogether or, at the very least, decrease the impact and severity if an accident does occur.
2. Develop preventative maintenance schedules
The safety of your drivers really starts with the safety of the vehicles they’re in. Trucks and tractor trailers that aren’t up-to-date with their regular maintenance—like oil and brake pad changes—are more likely to break down on the road. Telematics devices, like Samsara’s Vehicle Gateway (VGs), offer real-time visibility into odometer and engine data, including fault codes.

Using this data, your mechanics can build out robust preventative maintenance schedules based on mileage, days, previous breakdown history, and more—plus get real-time alerts for critical fault codes. Through regular upkeep and proactive repairs, you can ensure your vehicles are in top shape so drivers can avoid breakdowns on their routes.
3. Ensure comprehensive pre-trip and post-trip inspections
Hand-in-hand with increasing driver safety through maintenance is using thorough vehicle inspections to ensure all trucks are safe before drivers start driving. While pre-trip and post-trip inspections are required by the DOT, not just any inspection will do. To protect the safety of your drivers, use tools that ensure all inspections are thorough and accurately documented.

The Samsara Driver App, for example, allows drivers to submit electronic DVIRs directly from their phone. Our app walks drivers through every part of the inspection and allows them to upload photographs of any vehicle issues. This ensures that every inspection is thorough. And if an unsafe DVIR is submitted, your management team can be notified in real time, so they can arrange repairs to ensure your drivers are safe.
4. Coach drivers to avoid distractions
The Federal Motor Carrier Safety Administration (FMCSA) has identified distracted driving as the number one cause of accidents for truck drivers. Distracted driving is anything that causes a driver to take their eyes off the road or their hands off the steering wheel. Distractions can range from eating lunch while driving to turning out the window to stare at a billboard. But the most common form of distracted driving is cellphone usage, in particular texting while driving.

If your vehicles are equipped with dual-facing dash cams that have artificial intelligence (AI) built in, like Samsara AI dash cams, the camera can identify when a driver is distracted based on their head position (like if they’re looking down at their smartphone). Using this footage, you can coach drivers on how to correct their behaviors to avoid distractions and reduce their likelihood of causing an accident.
5. Have tools in place to respond to changes in road conditions
Road conditions can be unpredictable, especially for long-haul drivers working long hours across many regions or states. The two conditions most likely to impact the safety of drivers on the road are traffic and bad weather. Bumper-to-bumper traffic causes vehicles to constantly stop and go, which increases the likelihood of accidents. And bad weather conditions—like snow, ice, hail, or rain—can impact a driver’s visibility or can cause roads to become slippery, all of which contribute to a greater chance of an accident.

Dispatch management solutions, like Samsara, provide live weather and traffic map overlays that allow your dispatchers to see where road conditions may be unsafe for your drivers. With Samsara, your dispatchers can easily reroute drivers to avoid bad conditions and can directly send drivers their updated routes through our Driver App—which eliminates the need for manual back-and-forth calling.
6. Watch over your fleet with real-time GPS tracking
With a fleet management platform, like Samsara, that provides real-time GPS tracking you can always know the exact location of all your drivers. Real-time GPS is essential for ensuring the safety of your drivers, especially during breakdowns or other emergency situations. If a vehicle breaks down, it’s essential that you know its precise location so you’re able to assist the driver as soon as possible.

By knowing a driver’s exact location, you can either easily reroute them to the closest shop for a repair or can send a maintenance crew or tow truck directly to them. This ability to quickly and accurately respond to breakdowns means that you can reduce downtime and get your fleet back to work. Also, drivers won’t have to wait long hours off the side of the road, which can potentially put them at risk for collisions.
7. Encourage proper rest and breaks
Under HOS regulations, all drivers of commercial motor vehicles (CMVs) are required to take certain breaks before they can continue driving. For instance, under HOS truck driver limits, all CMV drivers must take a 30-minute break after eight hours of driving and a 10 to 11 hour break before coming back on duty.

Outside of taking these mandatory breaks, encourage drivers to always prioritize their safety and the safety of other motorists while on the road. This means encouraging your drivers to take additional breaks while en route if they are feeling sleepy or impaired in any way. Although this may require additional time taken out of their “On-Duty” period, it could play a significant part in reducing at-fault accidents due to fatigue. This not only keeps your drivers safer but helps you reduce accident-related costs.

8. Build out coaching and rewards programs with dash cams
An important part of building a safety-first culture is incentivizing and rewarding drivers who embody good driving habits and practices. One of the easiest ways to ensure safety in your fleet is through building out coaching and rewards programs. By introducing dash cams to your fleet, you can use real footage to actually show drivers how to improve their safety on the road.

Samsara’s dual-facing AI dash cams capture both external and in-cab footage. Plus, they integrate with our Vehicle Gateway, so it’s easy to detect when a driver brakes too hard, accelerates too fast, or turns too harshly. When one of these events is detected, you can receive a text or email notification. In that notification, you’ll have immediate access to footage of the event. You can review this footage with drivers to coach them on safer driving practices. And for on-the-go training, our dual-facing dash cams offer optional in-cab audio alerts for speeding and more, so you can minimize risk in real time.

With Samsara, you can track how your drivers’ safety is improving over time. Plus, every driver can see a safety score based on harsh events, miles driven, speeding, and more. Your fleet can use these scores to gamify safety by offering drivers with the highest score a reward. Our customers have offered everything from special plaques to the best parking spot to reward their safest drivers. But mostly it’s just the sheer recognition, not the reward, that counts.

TRUCKS